[afnog] HSSI error

[Eddy Kayihura M.]

Thanks again.

Mark Tinka wrote:
> On Tuesday 21 August 2007 13:57, Eddy Kayihura M. wrote:
>
>   
>> Here is the show diag part concerning the working HSSI
>>
>> /Slot 2:
>>         Mx HSSI-B Port adapter, 1 port
>>         Port adapter is analyzed
>>         Port adapter insertion time 05:56:13 ago
>>         EEPROM contents at hardware discovery:
>>         Hardware revision 1.20          Board revision A0
>>     
>           ^^^^^^^^^^^^^^^^^^^^^
> As you can see, above, this PA-H is quite current, with a 
> hardware revision of 1.20.
>
>   
>>  From your answer together with this results I assume when
>> we are reordering we should specify:
>>     
>
>   
>> - PA-H
>> - Hardware rev 1.17 or above
>>
>> or just the part number : 800-02747-06
>>     
>
> I would recommend you order the same one you have running, 
> with the hardware revision of 1.20 (or later). No need to 
> work with older gear if you can avoid it :-).
>
> The 'sh diag' also seems to have given you that PA's part 
> number. You can use that when you re-order.
>
> Cheers,
>
> Mark.
>