Re: Cisco 3600 Boot Problem

[Philip Smith <pfs at cisco.com>]

The onboard flash is blank, or contains something which the bootloader 
can't use as an image. If you have another 3600 router, put the flash simm 
in there and load a new image.

If this is the one and only 3600 router you have, unfortunately you'll have 
to upload an image using xmodem through the console cable... (Or if you 
have a PCMCIA flash card which can be used in the 3600s, put an image on 
there and boot from that (and then copy that image onto the onboard flash).)

philip
--

At 21:11 13/09/2002 +0100, Fisayo Adeleke wrote:
>Hi all,
>
>I just got this cisco 3600 series router and i have a problem with booting 
>it up. When i switch it on and monitor through the console connection, it 
>gives the ffg messages.
>
>System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
>C3600 processor with 32768 Kbytes of main memory
>Main memory is configured to 32 bit mode with parity enabled
>
>loadprog: bad file magic number:      0x0
>boot: cannot load "flash:"
>
>System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
>C3600 processor with 32768 Kbytes of main memory
>Main memory is configured to 32 bit mode with parity enabled
>
>PCMCIA Slot0: No Card Present
>
>System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
>C3600 processor with 32768 Kbytes of main memory
>Main memory is configured to 32 bit mode with parity enabled
>
>PCMCIA Slot1: No Card Present
>
>System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
>C3600 processor with 32768 Kbytes of main memory
>Main memory is configured to 32 bit mode with parity enabled
>
>loadprog: bad file magic number:      0x0
>boot: cannot load "flash:"
>
>System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
>C3600 processor with 32768 Kbytes of main memory
>Main memory is configured to 32 bit mode with parity enabled
>
>rommon 1 >
>
>I'll appreciate help from anybody
>
>regards
>
>-fisayo
>
>-----
>This is the afnog mailing list, managed by Majordomo 1.94.5
>
>To send a message to this list, e-mail afnog at afnog.org
>To send a request to majordomo, e-mail majordomo at afnog.org and put
>your request in the body of the message (i.e use "help" for help)
>
>This list is maintained by owner-afnog at afnog.org


-----
This is the afnog mailing list, managed by Majordomo 1.94.5

To send a message to this list, e-mail afnog at afnog.org
To send a request to majordomo, e-mail majordomo at afnog.org and put
your request in the body of the message (i.e use "help" for help)

This list is maintained by owner-afnog at afnog.org