[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Cisco 3600 Boot Problem



Hi all,

I just got this cisco 3600 series router and i have a problem with booting it up. When i switch it on and monitor through the console connection, it gives the ffg messages. 

System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
C3600 processor with 32768 Kbytes of main memory
Main memory is configured to 32 bit mode with parity enabled

loadprog: bad file magic number:      0x0
boot: cannot load "flash:"

System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
C3600 processor with 32768 Kbytes of main memory
Main memory is configured to 32 bit mode with parity enabled

PCMCIA Slot0: No Card Present

System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
C3600 processor with 32768 Kbytes of main memory
Main memory is configured to 32 bit mode with parity enabled

PCMCIA Slot1: No Card Present

System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
C3600 processor with 32768 Kbytes of main memory
Main memory is configured to 32 bit mode with parity enabled

loadprog: bad file magic number:      0x0
boot: cannot load "flash:"

System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
C3600 processor with 32768 Kbytes of main memory
Main memory is configured to 32 bit mode with parity enabled

rommon 1 >

I'll appreciate help from anybody

regards

-fisayo

-----
This is the afnog mailing list, managed by Majordomo 1.94.5

To send a message to this list, e-mail afnog at afnog.org
To send a request to majordomo, e-mail majordomo at afnog.org and put
your request in the body of the message (i.e use "help" for help)

This list is maintained by owner-afnog at afnog.org