[afnog] Connecting Catalyst 2950 and LinkSys VLAN 802.1q

Kareem Mahgoub kmahgoub at gmail.com
Wed Feb 21 21:26:38 UTC 2007


Dear Mark,
Thanks for your reply. I have issued the command "sh vtp status"
and the output was as follows:
VTP Version                     : 2
Configuration Revision          : 0
Maximum VLANs supported locally : 64
Number of existing VLANs        : 6
VTP Operating Mode              : Transparent
VTP Domain Name                 :
VTP Pruning Mode                : Disabled
VTP V2 Mode                     : Disabled
VTP Traps Generation            : Disabled
MD5 digest                      : 0x08 0x44 0x44 0xB7 0xC1 0x40 0x9B 0x1E
I am using 2590 "WS-C2950-24" with IOS C2950-I6Q4L2-M), Version 12.1(22)EA2
I am not sure if this is a limitation of the IOS or the HW.
Thanks for your help
Regards,
Kareem Mahgoub
----- Original Message ----- 
From: "Mark Tinka" <mtinka at africaonline.co.zw>
To: "Kareem Mahgoub" <kmahgoub at gmail.com>
Cc: <afnog at afnog.org>
Sent: Wednesday, February 21, 2007 11:15 PM
Subject: Re: [afnog] Connecting Catalyst 2950 and LinkSys VLAN 802.1q





More information about the afnog mailing list