[afnog] Frame Relay Over E1

[Bill Woodcock]

      On Wed, 7 Jun 2006 byaruhj at mtn.co.ug wrote:
    > I have got a point to point link using channelized E1 with a few slots
    > allocated to me. I would like to run several point to point links
    > encapsulated with frame relay. Can any one help me with how I can go abt
    > this?

Here's that config from one of my routers:

interface Serial5/0
 description 44YBRQ998864-001PT
 no ip address
 no ip directed-broadcast
 encapsulation frame-relay IETF
 ip route-cache flow
 priority-group 1
!
interface Serial5/0.17 multipoint
 description 4C Council - 72YBQQ998857-001PT
 ip address 157.22.11.73 255.255.255.252
 ip access-group 123 in
 ip access-group 122 out
 bandwidth 384
 appletalk cable-range 36200-36200 36200.1
 appletalk zone ZOC-FR001-WAN_Frame_Cloud
 appletalk distribute-list 603 out
 appletalk getzonelist-filter 603
 appletalk zip-reply-filter 603
 no cdp enable
 frame-relay map ip 157.22.11.74 17 broadcast
 frame-relay map appletalk 36200.50 17 broadcast

You can skip all of the AppleTalk part.  You'd use this config on one end, 
and a nearly-identical config on the other end, except that you'd enable 
frame relay switching on the other end.

                                -Bill