[afnog] Loss of switchs configuration

[Kone]

> -----Original Message-----
> From: afnog-bounces at afnog.org [mailto:afnog-bounces at afnog.org] On Behalf
> Of
> Mark Tinka
> Sent: Thursday, September 08, 2005 3:58 PM
> To: Kone
> Cc: afnog at afnog.org
> Subject: Re: [afnog] Loss of switchs configuration
>
> On Thursday 08 September 2005 15:19, Kone wrote:
>> Hello all,
>> I have more then 15 switchs (Cisco 3524, 2950) on the
>> network. I have configured vlans on all the switchs
>> and trunk some ports. But sometimes, after the power
>> down, the configuration is lost.
>
> Do you lose the configuration on all 15 routers, or just
> a few?

Not for all but just a few !

>
> When you boot up, do you lose the entire configuration,
> or just the VLAN specific settings?

I have entiere configuration but some ports change Vlan or trunk. For
example, port 4 in Vlan 2 can be in Vlan 3 ou 4

>
>> But after
>> modifaication I save the configuration #copy
>> running-config startup-config
>
> The 2950 NVRAM size is about 32K. How much of it are you
> using? You can show this when you type 'show run' and
> look at 'Current configuration : xxxx bytes' at the top
> of the output.

I have : Using 1183 out of 32768 bytes

==============
Kone

>
> Mark.
>
>> I use console port for the confuguration or Cisco
>> Cluster Manager Systems CMS. The IOS of 2950 is
>> 12.1(11)EA1.
>> I need help please !
>>
>> ==============================>
>> Kone Bakenon K.
>> Computer Science Center
>> University of Ouagadougou
>> 03 BP 7021 Ouagadougou 03
>> Tel : +226 76 65 73 92
>> Fax : +226 50 30 72 42
>> Burkina Faso
>> ==============================>
>> _______________________________________________
>> afnog mailing list
>
> _______________________________________________
> afnog mailing list