[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [afnog]Proxy Server Hanging
- To: rmikisa at one2net.co.ug
- Subject: Re: [afnog]Proxy Server Hanging
- From: Paul <pademmy at yahoo.com>
- Date: Mon, 29 Sep 2003 09:50:41 -0700 (PDT)
- Cc: Stephane Bortzmeyer <bortzmeyer at nic.fr>
- Cc: afnog at afnog.org
- Content-Type: multipart/mixed; boundary="===============16734577222908964=="
- Delivered-To: afnog-archive at lists.eahd.or.ug
- Delivered-To: afnog at afnog.org
- In-Reply-To: <1064849605.2478.19.camel at broomers.net>
- List-Archive: <http://listserv4.cfi.co.ug/pipermail/afnog>
- List-Help: <mailto:afnog-request at afnog.org?subject=help>
- List-Id: The AfNOG general discussion list <afnog.afnog.org>
- List-Post: <mailto:afnog at afnog.org>
- List-Subscribe: <http://listserv4.cfi.co.ug/mailman/listinfo/afnog>,<mailto:afnog-request at afnog.org?subject=subscribe>
- List-Unsubscribe: <http://listserv4.cfi.co.ug/mailman/listinfo/afnog>,<mailto:afnog-request at afnog.org?subject=unsubscribe>
- Sender: afnog-bounces at afnog.org
Hello,
Thanks for your response. But have no choice than to loop from one switch to another or if you can suggest another way I can achieve the connectivity.
I have 45 workstation, I have three (4) HP/cisco 10BaseT 16port and one HP (1) fastethernet 10/100 switch on the network.
The radio link was terminated on the 10/100 switch, and the server or proxy server was connected directly to the 10/100 switch and the second interface for the LAN was connected to another 10BaseT HP switch and I now run a straight cable from that switch to another 10BaseT switch which was also link with a short straight cable to another 10BaseT switch and finally conected to another 10BaseT switch, so that is how I did the connection.
So what would you suggest or advice I do at this stage?
your urgent technical response will be highly appreciated.
thanks
AJ
Richard Mikisa <rmikisa at one2net.co.ug> wrote:
I have seen that happen once, and the problem was that I had a cable
looping from one port to another on the same switch. So just make sure
you have no such loop on the switch that your server is plugged into.
On Mon, 2003-09-29 at 16:01, Paul wrote:
> Good day ,
> Pls I need your help and technical advice on my server that is
> misbehaving. whenever I plug in the local Area Network on the switch
> after some few minutes the system will hang not until I unplug it it
> will pick up again,
> Pls what do you think could be the problem, is it the sytems resources
> or the that the internet access on the server had a virus or one of
> the client has a virus.
> am using a clone system of P4 2.5ghz Intel MMX process and 256 MB Ram.
>
> thanks.
> AJ
>
> Paul Ademola Ajayi
> Ne
twork
Engineer
> Global Technology and Communication Systems Limited
> 77B Evo Road, P/H, Rivers State, Nigeria.
> Tel.: 234-84-578432 GSM:234-803-6700115
> E-mail:pademmy at yahoo.com
>
>
> ______________________________________________________________________
> Do you Yahoo!?
> The New Yahoo! Shopping - with improved product search
>
> ______________________________________________________________________
>
> __________________________________________________
> This is the Africa Network Operators' Group(AfNOG)
> technical discussion list.
> The AfNOG website is:
--
Cheers Richard
"I was gratified to be able to answer promptly, and I did. I said I
didn't know."
-- Mark Twain
Paul Ademola Ajayi
Network Engineer
Global Technology and Communication Systems Limited
77B Evo Road, P/H, Rivers State, Nigeria.
Tel.: 234-84-578432 GSM:234-803-6700115
E-mail:pademmy at yahoo.com
Do you Yahoo!?
The New Yahoo! Shopping - with improved product search
__________________________________________________
This is the Africa Network Operators' Group(AfNOG)
technical discussion list.
The AfNOG website is: <http://www.afnog.org>