[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: Aggregate Traffic on a Switch
- To: "Brian Longwe" <brian at pch.net>, <afnog at afnog.org>
- Subject: RE: Aggregate Traffic on a Switch
- From: "Fisayo Adeleke" <fisayo at steineng.com>
- Date: Mon, 7 Apr 2003 16:00:35 +0100
- Content-Class: urn:content-classes:message
- Content-Transfer-Encoding: base64
- Content-Type: text/plain;charset="utf-8"
- Delivered-To: afnog-archive at lists.eahd.or.ug
- Delivered-To: afnog-outgoing at afnog.org
- Delivered-To: afnog at afnog.org
- Sender: owner-afnog at afnog.org
- Thread-Index: AcL80gTL4KN62hU3Sy69TYF/pqg9QwARCiNc
- Thread-Topic: Aggregate Traffic on a Switch
Hello Brian,
If i setup the mirror port, i assume the port will not be connected to any other device, am I right?
thanks
-Fiao
-----Original Message-----
From: Brian Longwe [mailto:brian at pch.net]
Sent: Mon 4/7/2003 7:29 AM
To: Fisayo Adeleke
Cc: afnog at afnog.org
Subject: Re: Aggregate Traffic on a Switch
If the switch suports it you can set up a mirror port which will receive a
copy of all traffic passing through other ports - then monitor that as the
aggregate.
Longwe
On Mon, 7 Apr 2003, Fisayo Adeleke wrote:
> Hello,
>
> How can I use MRTG to graph the aggregate traffic on a switch. I mean not the per port graph it shows, but a single graph that aggregates the entire traffic across the switch.
>
> thanks
>
> -Fiao
> ÿÿÿý8b²+-…柞ˆ&j)bž b²ßæjv yÖò1¨èÚ&£_ýãþS¢Ç§u©ž²Æ zÚ-†+%ŠËÿ{ùšŠVŸžˆÿiùèƒú+:,zwZê®zËm¢f£¢·hšÞþf¢–f£¢·hšÚ~z þŠàjwiºÜ¨ººÞªç¬¶)í…æèw* ¶¦zËïâýë¬{ø^–Ÿß¢¸^–ŸÓ†+%ŠËb²f¢žÖ¢ç[ÊŒ'z¿Ú~z ý§ç¢è
>
Nay XXfjo#ݢj5SǧuƠz-+%^i聧
+:,zwZzmfhj)fj:+vi肊jwiܨު笶)w* z螺ǡzZ_^bجy ޭ(