[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: how to disable and activate a clinet on cisco router to gain bandwidth access

This is very good.
 
For your application, a class C subnetting scheme would be typcial.
 
Regards,

Mark Tinka - CCNA
Network Engineer
Africa Online Uganda
5th Floor, Commercial Plaza
7 Kampala Rd,
Tel:   +256-41-258143
Fax:   +256-41-258144
E-mail: mtinka at africaonline.co.ug
Web:     www.africaonline.co.ug

 

-----Original Message-----
From: David Lubowa [mailto:ziggy at one2net.co.ug]
Sent: Monday, March 10, 2003 7:42 PM
To: mtinka at africaonline.co.ug; pademmy at yahoo.com; afnog at afnog.org
Subject: RE: how to disable and activate a clinet on cisco router to gain bandwidth access

 
try this document out, it might help you with your subnetting,  it's a msword doc if you using Unix/Linux guess you can use staroffice to view the document
 
cheers
David Ziggy Lubowa
 
-----Original Message-----
From: owner-afnog at afnog.org [mailto:owner-afnog at afnog.org]On Behalf Of Mark Tinka
Sent: Monday, March 10, 2003 7:06 PM
To: pademmy at yahoo.com; afnog at afnog.org
Subject: RE: how to disable and activate a clinet on cisco router to gain bandwidth access

To disable a client from being routed to the Internet:
 
ip route 1.2.3.4 255.255.255.255 null 0
 
To enable that client get routed to the Internet again:
 
no ip route 1.2.3.4 255.255.255.255 null 0
 
Get Perl from www.perl.org. Current version is Perl 5.8.0.
 
For CCNA Study Guide, check out www.sybex.com. Subnetting is also discussed in serious detail, in this book.
 
However, just to understand your setup, you have a sufficient number of serial interfaces. Why would you want to separate the clients on different serial interfaces? I think you need to tell us what your topology is, what services [including Layer 2 services] you offer your clients, and how they connect to you. Also, include how you connect to the Internet, providing your DCE hardware like satellite modem, CSU/DSU to your telco/provider e.t.c. That way, we can help you define your current topology, and what it should be for your to complete your task.
 
You may also send your configuration so we understand the way your are subnetting.
 
Regards,

Mark Tinka - CCNA
Network Engineer
Africa Online Uganda
5th Floor, Commercial Plaza
7 Kampala Rd,
Tel:   +256-41-258143
Fax:   +256-41-258144
E-mail: mtinka at africaonline.co.ug
Web:     www.africaonline.co.ug

 

-----Original Message-----
From: owner-afnog at afnog.org [mailto:owner-afnog at afnog.org]On Behalf Of Paul Ademola Ajayi
Sent: Monday, March 10, 2003 6:49 PM
To: afnog at afnog.org
Subject: how to disable and activate a clinet on cisco router to gain bandwidth access

Hi afnog,

Pls I want to know how to do this task on the cisco router2600, I want to make a particular client from browsing on my network since my bandwidth manager is band and I want to know how to allow him/her back when he /she has fulfill his/her payment.

so pls where excitely am I going to implement the command, is it in the interface of the s0/0 in the global configuration or I need not to go into the serial interface to do that confirguartion?.

moreso, which of the site do think I can get a perl ver 5.6 to install in order to work with my mrtg software?

Is there anyone that full knowledge of how to configured verester comstream very well?

in just the sorry to bother you again, if want to make the client to get Internet bandwidth after I have null it to 0, how am I going to release him so that he can browse?

pls can you send me good study material or guide on CCNA for me to read for my own exam too?. I also need some expert ideas from you, I don't really understand subnetting very well so I don't know how you can be of help to me on this problem.Like I want to connect a client to my second serial interface on my router bcos my router has just two interface we are using WIC card. so to go about the IP configuration, the route and subnet is now my problem.

when I configured the other router with the IP ROUTE command I gave, it complain of IP address overlap so how can you help me out?

thanks.

ajayi



Paul Ademola Ajayi
Systems/Network Engineer
Orbit Wireless Internet Services
Plot 32, No. 6 Birabi Street, Off Presidential Hotel
G.R.A. Phase I Port Harcourt, Rivers State, Nigeria.
Tel.:234-84-573479Mobile:234-803-324-7220
E-mail: ajayi4u at hotmail.com OR pademmy at yahoo.com


Do you Yahoo!?
Yahoo! Tax Center - forms, calculators, tips, and more