[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: IPMASQ: reverse ICMP: failed checksum.
What version of BIND are you running? Is it BIND 9 with DNSSEC enabled? If
so, you could be failing on integrity [checksum] checks for zone transfers
or inter-DNS communications.
Regards,
Mark Tinka - CCNA
Network Engineer
Africa Online Uganda
5th Floor, Commercial Plaza
7 Kampala Rd,
Tel: +256-41-258143
Fax: +256-41-258144
E-mail: mtinka at africaonline.co.ug
Web: www.africaonline.co.ug
-----Original Message-----
From: owner-afnog at afnog.org [mailto:owner-afnog at afnog.org]On Behalf Of
Dehezi Isp tech support
Sent: Tuesday, February 04, 2003 4:29 PM
To: afnog at afnog.org
Subject: IPMASQ: reverse ICMP: failed checksum.
Hi
Guys
i get the error below on machine 192.168.1.2 (dns)
"
IPMASQ: reverse ICMP: failed checksum. from 192.168.1.16(surecom firewall)
"
these ips are on the same lan .. and have the same gateway ...
what is the work around over this error ... it flashess my
/dev/console every
2
min a line comes up !
even when i stop my firewall the error dont go a way !!!
thanx
blaq
-----
This is the afnog mailing list, managed by Majordomo 1.94.5
To send a message to this list, e-mail afnog at afnog.org
To send a request to majordomo, e-mail majordomo at afnog.org and put
your request in the body of the message (i.e use "help" for help)
This list is maintained by owner-afnog at afnog.org
-----
This is the afnog mailing list, managed by Majordomo 1.94.5
To send a message to this list, e-mail afnog at afnog.org
To send a request to majordomo, e-mail majordomo at afnog.org and put
your request in the body of the message (i.e use "help" for help)
This list is maintained by owner-afnog at afnog.org