Re: Cisco 3600 Boot Problem

[Geert Jan de Groot <GeertJan.deGroot at bsdi.com>]

Fisayo,

To be more explicit about the comments Randy made earlier:
Assuming that you have access to a windows 95/98 PC, can
connect the router to the COM port of the PC, and have
hyperterm installed (or just install hyperterm from the 
standard windows distribution), you have all the tools you need
to recover.

The ROM monitor allows you to upload a Cisco image using 
the xmodem protocol. Hyperterm speaks hyperterm too, so with
rommon and hyperterm you should be able to upload an image
and run it.

Once the router runs IOS, just copy tftp flash and you should be
good to go.

Uploading IOS this way may take some time (a few hours), but you
don't need to sit and wait for it.

Randy provided pointers with the exact procedures. I've learnt
that it's a good idea to read and re-read his email messages
as he is sometimes a bit dense (but always right on the money).

Let us know how it went!

Geert Jan


-----
This is the afnog mailing list, managed by Majordomo 1.94.5

To send a message to this list, e-mail afnog at afnog.org
To send a request to majordomo, e-mail majordomo at afnog.org and put
your request in the body of the message (i.e use "help" for help)

This list is maintained by owner-afnog at afnog.org