[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Cisco 3600 Boot Problem
> the unfortunate thing is that this is the only 3600 router i have, and
> how do i get an image to upload into it as i do not have on the terminal
> station OR is it downloadable somewhere. it's obvious that the flash is
> blank of any image file .... the solution i suppose now is how to get to
> upload an image back into it.
you seem not to have read what
> Philip Smith wrote:
>> ...
>> If this is the one and only 3600 router you have, unfortunately
>> you'll have to upload an image using xmodem through the console
>> cable... (Or if you have a PCMCIA flash card which can be used
>> in the 3600s, put an image on there and boot from that (and then
>> copy that image onto the onboard flash).)
randy
-----
This is the afnog mailing list, managed by Majordomo 1.94.5
To send a message to this list, e-mail afnog at afnog.org
To send a request to majordomo, e-mail majordomo at afnog.org and put
your request in the body of the message (i.e use "help" for help)
This list is maintained by owner-afnog at afnog.org