Re: router collision error

[Stephane Lee <slee at ile-maurice.com>]

At one end, it may be a full-duplex interface and on the other end
half-duplex. If it's the case, set the full-duplex interface to
half-duplex.


On Thu, 7 Mar 2002, Stephane Bortzmeyer wrote:

> On Thu, Mar 07, 2002 at 11:25:00AM +0100,
>  Fisayo Adeleke <fisayo at steineng.com> wrote
>  a message of 26 lines which said:
>
> > 00:06:20: %QUICC_ETHER-5-LATECOLL: Unit 0, late collision error
>
> On Ethernet, "late collision" means a collision occured after the
> maximum delay which you could expect, giving the minimum size of a
> packet and the maximum length of the cable.
>
> You probably have a segment which is too long and/or repeaters which
> are too many or too slow.
>
> -----



-----
This is the afnog mailing list, managed by Majordomo 1.94.5

To send a message to this list, e-mail afnog at afnog.org
To send a request to majordomo, e-mail majordomo at afnog.org and put
your request in the body of the message (i.e use "help" for help)

This list is maintained by owner-afnog at afnog.org