[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: problem with WAN WIC-2A/S card on CISCO 2600
What is the data rate of the circuit? The WIC-2A/S support a maximum
synchronous speed of 128kbps. Check
http://www.cisco.com/univercd/cc/td/doc/pcat/sewn__y2.htm.
philip
--
At 19:41 20/08/00 +0000, AINA ALAIN PATRICK wrote:
>hi,
>
> > I would expect transmit data to be on, since the Cisco should be sending
> > HDLC flag bytes (01111110) continuously. So perhaps the DSU has got its
> > clocking configuration wrong (it is expecting the Cisco to generate clock,
> > while the Cisco is expecting the DSU to generate clock).
>
>The 2610 is replacing a 2511 which is working fine on the line with the
>TELSAT 2514 (interface RS449) from telco which is generating the clock.
>
>
>
>--alain
-----
This is the afnog mailing list, managed by Majordomo 1.94.4
To send a message to this list, e-mail afnog at afnog.org
To send a requet to majordomo, e-mail majordomo at afnog.org and put
your request in the body of the message (i.e use "help" for help)
This list is mantained by owner-afnog at afnog.org