[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: FreeBSD



On Mon, Aug 14, 2000 at 04:27:45PM +0300, Sematimba Noah wrote:
> I thought it was a problem with RAM so I increased the RAm to 128M but the
> problem persisted. So I suspected my hard disk and changed to a brand new
> one but I still get the same errors. Does someone know what could be
> causing these errors?

Most likely problems:

- Bad RAM (rather than too little RAM). Try taking out the original RAM.
- Wrong spec RAM (e.g. 66MHz RAM when motherboard is set to 100MHz bus)
- Overheating   -- check your CPU fan
- Overclocking  \ check all the jumpers
- CPU voltage   / on the motherboard

Cheers,

Brian.

-----
This is the afnog mailing list, managed by Majordomo 1.94.4

To send a message to this list, e-mail afnog at afnog.org
To send a requet to majordomo, e-mail majordomo at afnog.org and put
your request in the body of the message (i.e use "help" for help)

This list is mantained by owner-afnog at afnog.org