[afnog] ASDL to Ethernet port

[ANTHONY GESASE]

Thanks Malik,

I have an internet cable (rj45) that is the one that brings internet to my office, and my WAN port is ASDL.   LAN interface on the router is okey ( has 4 Ethernet ports) I want to access internet through my router and also access my local servers (cable ) which are connected on one switch. 

let me try the options (VLAN)  previously suggested with other mambers  then see if it works.

Anthony 


--- On Sat, 5/21/11, Malick.Sy at swisscom.com <Malick.Sy at swisscom.com> wrote:

From: Malick.Sy at swisscom.com <Malick.Sy at swisscom.com>
Subject: Re: [afnog] ASDL to Ethernet port
To: anthonygesase at yahoo.com
Cc: afnog at afnog.org
Date: Saturday, May 21, 2011, 4:29 AM

You should have PPOE details for the DSL port, these usually include username and password and virtual circuit number, your ISP can provide this for you, once received you should be able to set up a profile for internet on the router and see a default route pointing into your provider's cloud. Who is your service provider? Can you ping anything on the net or traceroute?n Just some thoughts that came to mind.
The link at below might help
http://www.cisco.com/en/US/tech/tk175/tk15/technologies_configuration_example09186a008071a7c2.shtml
..........................................
 Best Regards,

 Malick Sy
 Sr. Network Engineer
 Swisscom Hospitality Services S.A
 ch. du Pavillon 2
 CH-1218 Le Grand-Saconnex
 Desk Phone:+41 227 407 585
 Cellular Phone:+ 41 794 426 765
 Fax Number: +41 227 740 7542
 Internet: www.swisscom.com/hospitality
 ............................................

 This message contains confidential or privileged information and is intended solely for the use of the individual(s) to whom it is addressed. If you are not the intended recipient, you are hereby notified that you must not use, copy, disclose, forward or take any action based on this message or information herein. If you have received this message by error, please advise the sender immediately and delete this message.




On May 20, 2011, at 1:49 PM, ANTHONY GESASE wrote:

Hi,

Currently having a challenge,

I have a Cisco 800 series wireless router it has Four LAN ports and one ADSL port
I have configure the LAN (private IP) and connect (cable) to a switch (which connects to my local servers ).

I can access wireless LAN and and all my local servers and its working fine but cant go outside for the internet

The router has no fast Ethernet port that I could connect in order to get internet, it has
an ADSL connection type.

Kindly advice, what can i do to connect to the internet? cause the internet cable is RJ-45 and cant connect to RJ-11 (ADSL connection type)

Thanks

_______________________________________________
afnog mailing list
http://afnog.org/mailman/listinfo/afnog

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://afnog.org/pipermail/afnog/attachments/20110522/fb0d6332/attachment.html>