[afnog] SOLVED: Cisco 7204 VXR crashing and goes into reboot loop

[Frank Habicht]

Thanks for sending update to the list!
Frank

On 6/15/2010 10:45 AM, Shepherd Magumo wrote:
> Hi All,
>
> I secured a replacement NPE300 and all is well again with the router.
>
> Thanks for the assistance. Enjoy your day!!
>
> Shepherd
>
> On Thu, Jun 10, 2010 at 6:31 PM, Mark Tinka <mtinka at globaltransit.net
> <mailto:mtinka at globaltransit.net>> wrote:
>
>     On Thursday 10 June 2010 06:15:17 pm Shepherd Magumo wrote:
>
>     > Thanks for the help, specifically Mark, Philip, Oluwaseun
>     >  and Bope.
>
>     Shepherd, glad to you hear you solved your problem.
>
>     Your testing sounds reasonably exhaustive per your
>     circumstances. Would suggest replacing your NPE-300 with one
>     that isn't defective if you have a chance. Note that this
>     board is now EoL/EoS, and as such, you can't buy it new from
>     Cisco. You can only get it on the refurbished market.
>
>     The NPE-400 or later are still current, in case you require
>     Cisco support in the future.
>
>     Also note that the last supported "current" release of IOS
>     for this platform (NPE-300) is 12.3(3)i - used to be
>     12.3(10)b, but that has since been deferred. That said, I've
>     run later code without problems, up to 12.3(22), I think,
>     although I'd recommend treading carefully if you need to run
>     something more current.
>
>     Cheers,
>
>     Mark.
>
>
>
> _______________________________________________
> afnog mailing list
> http://afnog.org/mailman/listinfo/afnog

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://afnog.org/pipermail/afnog/attachments/20100615/bfb9b0aa/attachment.htm>