[afnog] Frame Relay Over E1

[kaggwas@mtn.co.ug]

At a casual glance it looks like a layer 1 problem on Serial0/0/0

> -----Original Message-----
> From: afnog-bounces at afnog.org 
> [mailto:afnog-bounces at afnog.org] On Behalf Of byaruhj at mtn.co.ug
> Sent: Wednesday, June 07, 2006 5:23 PM
> To: john.mwangi at kdn.co.ke; mtinka at africaonline.co.zw
> Cc: afnog at afnog.org
> Subject: Re: [afnog] Frame Relay Over E1
> 
> For some reason its not working tho:( please advise Router A
> 
> controller E1 4/7
> 
>  channel-group 1 timeslots 21-22
> 
> 
> interface Serial4/7:1
>  no ip address
>  encapsulation frame-relay
>  no clns route-cache
> !
> interface Serial4/7:1.1 point-to-point
>  description Link FR test
>  ip address 212.88.112.245 255.255.255.252
>  frame-relay interface-dlci 16   
> 
> 
> Router B
> 
> controller E1 0/0/0
>  
>  channel-group 1 timeslots 21-22
> 
> interface Serial0/0/0:1
>  no ip address
>  encapsulation frame-relay
> !
> interface Serial0/0/0:1.1 point-to-point  ip address 
> 212.88.112.246 255.255.255.252  frame-relay interface-dlci 16
> 
> show Interface output
> 
> Serial4/7:0            212.88.103.113  YES NVRAM  up          
>           up
> 
> Serial4/7:1            unassigned      YES manual up          
>           down
> 
> 
> Serial0/0/0:1              unassigned      YES manual up
> down
> Serial0/0/0:1.1            212.88.112.246  YES manual down
> down
> 
> 
> -----Original Message-----
> From: John H Mwangi [mailto:john.mwangi at kdn.co.ke]
> Sent: Wednesday, June 07, 2006 4:32 PM
> To: mtinka at africaonline.co.zw; James Byaruhanga
> Cc: afnog at afnog.org
> Subject: RE: [afnog] Frame Relay Over E1
> 
> Hi All,
> 
> In addition to Mark's comment, every point-point link will be 
> differentiated by a DLCI e.g
> 
> 
> controller E1 1/0
>  channel-group 0 timeslots 5-6
> !
> interface Serial1/0:0
>  encapsulation frame-relay
> !
> Interface serial1/0:0.1
> Description Link to (Client A)
> Frame-relay interface-dlci 21
> !
> Interface serial1/0:0.2
> Description Link to (Client B)
> Frame-relay interface-dlci 22
> !
> 
> The routing will be as per point-point IPs you have issued.
> 
> Rgds,
> 
> Mwangi JH 
> 
> -----Original Message-----
> From: afnog-bounces at afnog.org 
> [mailto:afnog-bounces at afnog.org] On Behalf Of Mark Tinka
> Sent: Wednesday, June 07, 2006 3:39 PM
> To: byaruhj at mtn.co.ug
> Cc: afnog at afnog.org
> Subject: Re: [afnog] Frame Relay Over E1
> 
> On Wednesday 07 June 2006 14:05, byaruhj at mtn.co.ug wrote:
> > Hello guys,
> 
> Hi James.
> 
> > I have got a point to point link using channelized E1 with 
> a few slots 
> > allocated to me. I would like to run several point to point links 
> > encapsulated with frame relay. Can any one help me with how 
> I can go 
> > abt this?
> 
> Simply create your channel-groups under your E1 controller, 
> and then define frame relay as your Layer 2 encapsulation on 
> the associated channel/serial interface - doing the same on 
> the remote side.
> 
> Something like this (assuming Cisco IOS):
> 
> controller E1 1/0
>  channel-group 0 timeslots 5-6
> !
> interface Serial1/0:0
>  encapsulation frame-relay
> 
> 
> Cheers,
> 
> Mark.
> 
> 
> 
> --
> This message has been scanned for viruses and dangerous 
> content by MailScanner, and is believed to be clean.
> 
>