[afnog] Frame Relay Over E1

[byaruhj@mtn.co.ug]

For some reason its not working tho:( please advise
Router A

controller E1 4/7

 channel-group 1 timeslots 21-22


interface Serial4/7:1
 no ip address
 encapsulation frame-relay
 no clns route-cache
!
interface Serial4/7:1.1 point-to-point
 description Link FR test
 ip address 212.88.112.245 255.255.255.252
 frame-relay interface-dlci 16   


Router B

controller E1 0/0/0
 
 channel-group 1 timeslots 21-22

interface Serial0/0/0:1
 no ip address
 encapsulation frame-relay
!
interface Serial0/0/0:1.1 point-to-point
 ip address 212.88.112.246 255.255.255.252
 frame-relay interface-dlci 16

show Interface output

Serial4/7:0            212.88.103.113  YES NVRAM  up                    up

Serial4/7:1            unassigned      YES manual up                    down


Serial0/0/0:1              unassigned      YES manual up
down
Serial0/0/0:1.1            212.88.112.246  YES manual down
down


-----Original Message-----
From: John H Mwangi [mailto:john.mwangi at kdn.co.ke] 
Sent: Wednesday, June 07, 2006 4:32 PM
To: mtinka at africaonline.co.zw; James Byaruhanga
Cc: afnog at afnog.org
Subject: RE: [afnog] Frame Relay Over E1

Hi All,

In addition to Mark's comment, every point-point link will be differentiated
by a DLCI e.g


controller E1 1/0
 channel-group 0 timeslots 5-6
!
interface Serial1/0:0
 encapsulation frame-relay
!
Interface serial1/0:0.1
Description Link to (Client A)
Frame-relay interface-dlci 21
!
Interface serial1/0:0.2
Description Link to (Client B)
Frame-relay interface-dlci 22
!

The routing will be as per point-point IPs you have issued.

Rgds,

Mwangi JH 

-----Original Message-----
From: afnog-bounces at afnog.org [mailto:afnog-bounces at afnog.org] On Behalf Of
Mark Tinka
Sent: Wednesday, June 07, 2006 3:39 PM
To: byaruhj at mtn.co.ug
Cc: afnog at afnog.org
Subject: Re: [afnog] Frame Relay Over E1

On Wednesday 07 June 2006 14:05, byaruhj at mtn.co.ug wrote:
> Hello guys,

Hi James.

> I have got a point to point link using channelized E1 with a
> few slots allocated to me. I would like to run several point
> to point links encapsulated with frame relay. Can any one help
> me with how I can go abt this?

Simply create your channel-groups under your E1 controller, and 
then define frame relay as your Layer 2 encapsulation on the 
associated channel/serial interface - doing the same on the 
remote side.

Something like this (assuming Cisco IOS):

controller E1 1/0
 channel-group 0 timeslots 5-6
!
interface Serial1/0:0
 encapsulation frame-relay


Cheers,

Mark.



-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.

-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: FRame-relay.txt
Url: http://listserv2.cfi.co.ug/pipermail/afnog/attachments/20060607/880f92ee/FRame-relay.txt