[afnog] Frame Relay Over E1

[John H Mwangi]

Hi All,

In addition to Mark's comment, every point-point link will be differentiated
by a DLCI e.g


controller E1 1/0
 channel-group 0 timeslots 5-6
!
interface Serial1/0:0
 encapsulation frame-relay
!
Interface serial1/0:0.1
Description Link to (Client A)
Frame-relay interface-dlci 21
!
Interface serial1/0:0.2
Description Link to (Client B)
Frame-relay interface-dlci 22
!

The routing will be as per point-point IPs you have issued.

Rgds,

Mwangi JH 

-----Original Message-----
From: afnog-bounces at afnog.org [mailto:afnog-bounces at afnog.org] On Behalf Of
Mark Tinka
Sent: Wednesday, June 07, 2006 3:39 PM
To: byaruhj at mtn.co.ug
Cc: afnog at afnog.org
Subject: Re: [afnog] Frame Relay Over E1

On Wednesday 07 June 2006 14:05, byaruhj at mtn.co.ug wrote:
> Hello guys,

Hi James.

> I have got a point to point link using channelized E1 with a
> few slots allocated to me. I would like to run several point
> to point links encapsulated with frame relay. Can any one help
> me with how I can go abt this?

Simply create your channel-groups under your E1 controller, and 
then define frame relay as your Layer 2 encapsulation on the 
associated channel/serial interface - doing the same on the 
remote side.

Something like this (assuming Cisco IOS):

controller E1 1/0
 channel-group 0 timeslots 5-6
!
interface Serial1/0:0
 encapsulation frame-relay


Cheers,

Mark.



-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.