[afnog] MikroTik Router Wireless

[John Gitau]

> I have now changed the mode from station to ap-bridge and the 
> band from 5GHz to 2.4GHz. The IP addresses of the interfaces 
> are the same.
> 
> Unfortunately, I still do not detect any wireless connections arround.
> Any other suggestions please?

Hmm, I don't understand, changing from station should have sorted you
out, -tried the usual restarting stuff?- aanyway please send the
following output:

/interface print
/ip address print
/interface wlan1 print 
/interface wlan2 print
/interface wireless print

If you just changed the frequency ensure that your cards - on the
PC/laptop are on the corresponding frequency. Then try scanning again.
Also shut one of the cards down and check for any transmissions, They
could be interfering with one another but that ascertion is neither here
nor there..first send the output from the above, then we can take it
from there.

**Gitau
Safaricom "The Better Option"
........................................................................
. 
"If the entire earth, land and water, were covered with computers, 
IPv6 would allow 7x10^23 IP addresses per square meter.  [...]  While it
was not the intention to give every molecule on the surface of the earth
its own IP address, we are not that far off."
	.. Tannenbaum, .Computer.Networks., 3rd Edition
........................................................................
.